Comprehensive Guide to Solar Panel Types

Join us for Empower on June 5-6! You&#;ll hear from industry experts on everything from what to expect for the rest of , to how AI is affecting the industry, and more.

The push for renewable energy sources has led to a surge in solar energy use. In the past decade alone, the solar industry grew by almost 50%, buoyed by federal support such as the

Link to OUSHANG SOLAR

Solar Investment Tax Credit

and strong commercial and industrial demand for clean energy. 

As the solar sector continues to rise, it&#;s worth studying the backbone of the solar industry: solar panels.

This guide will illustrate the different types of solar panels available on the market today, their strengths and weaknesses, and which is best suited for specific use cases.

What is a Solar Panel?

Solar panels are used to collect solar energy from the sun and convert it into electricity.

The typical solar panel is composed of individual solar cells, each of which is made from layers of silicon, boron and phosphorus. The boron layer provides the positive charge, the phosphorus layer provides the negative charge, and the silicon wafer acts as the semiconductor. 

When the sun&#;s photons strike the surface of the panel, it knocks out electrons from the silicon &#;sandwich&#; and into the electric field generated by the solar cells. This results in a directional current, which is then harnessed into usable power. 

The entire process is called the photovoltaic effect, which is why solar panels are also known as photovoltaic panels or PV panels. A typical solar panel contains 60, 72, or 90 individual solar cells.

The 4 Main Types of Solar Panels

There are 4 major types of solar panels available on the market today: monocrystalline, polycrystalline, PERC, and thin-film panels.

Monocrystalline solar panels

Also known as single-crystal panels, these are made from a single pure silicon crystal that is cut into several wafers. Since they are made from pure silicon, they can be readily identified by their dark black color. The use of pure silicon also makes monocrystalline panels the most space-efficient and longest-lasting among all three solar panel types.

However, this comes at a cost &#; a lot of silicon is wasted to produce one monocrystalline cell, sometimes reaching over 50%. This results in a hefty price tag.

Polycrystalline solar panels

As the name implies, these come from different silicon crystals instead of one. The silicon fragments are melted and poured into a square mold. This makes polycrystalline cells much more affordable since there is hardly any wastage, and gives them that characteristic square shape.

However, this also makes them less efficient in terms of energy conversion and space, since their silicon purity and construction are lower than monocrystalline panels. They also have lower heat tolerance, which means they are less efficient in high-temperature environments.

Passivated Emitter and Rear Cell (PERC) panels

PERC solar panels

are an improvement of the traditional monocrystalline cell. This relatively new technology adds a passivation layer in the rear surface of the cell that enhances efficiency in several ways:

• It reflects light back into the cell, increasing the amount of solar radiation that gets absorbed.

• It reduces the natural tendency of electrons to recombine and inhibit the flow of electrons in the system.

• It allows greater wavelengths of light to be reflected. Light waves over 1,180nm can&#;t be absorbed by silicon wafers and simply pass through, so they end up heating the cell&#;s metal back sheet and reduce its efficiency. The passivation layer reflects these higher wavelengths and stops them from heating up the back sheet.

PERC panels allow greater solar energy collection in a smaller physical footprint, which makes them ideal for limited spaces.  They are only slightly more expensive to produce than traditional panels, due to the added materials needed, but they can be manufactured on the same equipment, and can end up having a lower average cost per watt due to their efficiency.

To get a better feel for the benefits of PERC panels, check out our blog

Thin-film solar panels

Thin-film panels are characterized by very fine layers that are thin enough to be flexible. Each panel does not require a frame backing, making them lighter and easier to install. Unlike crystalline silicon panels that come in standardized sizes of 60, 72, and 96-cell counts, thin-film panels can come in different sizes to suit specific needs. However, they are less efficient than typical silicon solar panels.

Thin-Film Solar Panel Variations

Unlike crystalline panels that use silicon, thin-film solar panels are made from different materials. These are:

• Cadmium telluride (CdTe)

• Amorphous silicon (a-Si)

• Copper indium gallium selenide (CIGS) 

Cadmium telluride (CdTe)

CdTe has the same low-cost advantage as polycrystalline cells while possessing the lowest carbon footprint, water requirement, and energy payback time of all solar panels types. However, the toxic nature of cadmium makes recycling more expensive than other materials.

Amorphous silicon (a-Si)

Amorphous silicon panels (A-Si) derive their name from their shapeless nature. Unlike mono-and polycrystalline solar cells, the silicon is not structured on the molecular level. 

On average, an a-Si cell requires only a fraction of the silicon needed to produce typical silicon cells. This allows them to have the lowest production cost, at the expense of efficiency. This is why a-Si panels are suited for applications that require very little power, such as pocket calculators.

Copper indium gallium selenide (CIGS)

 

CIGS panels use a thin layer of copper, indium, gallium, and selenium deposited on a glass or plastic backing. The combination of these elements results in the highest efficiency among thin-panel types, though still not as efficient as crystalline silicon panels.

Solar Panel Types by Efficiency

Among all panel types, crystalline solar panels have the highest efficiency.

• Monocrystalline panels have an efficiency rating over 20%.

• PERC panels add an extra 5% efficiency thanks to their passivation layer. 

• Polycrystalline panels hover somewhere between 15-17%.

In contrast, thin-film panels are usually 2-3% less efficient than crystalline silicon. On average:

• CIGS panels have an efficiency range of 13-15%.

• CdTe ranges between 9-11%.

• a-Si have the lowest efficiency at 6-8%.

Panel type Efficiency PERC

Highest (5% more than monocrystalline)

Monocrystalline

20% and up

Polycrystalline

15-17%

Copper indium gallium selenide (CIGS) 

13-15%

Cadmium telluride (CdTe)

9-11%

Amorphous silicon (a-Si)

6-8%

Solar Panel Types by Power Capacity

Monocrystalline cells have the highest power capacity, thanks to their single-crystal construction that allows a higher output rating in a smaller package. Most monocrystalline panels can generate up to 300w of power capacity.

Recent advances in solar technology have allowed polycrystalline panels to bridge the gap. A standard 60-cell polycrystalline panel is now capable of producing between 240-300w. However, monocrystalline panels still beat polycrystalline in terms of power capacity per cell.

Because thin-film panels don&#;t come in uniform sizes, there is no standard measure of power capacity, and the capacity of one thin-film panel will differ from another based on its physical size. In general, given the same physical footprint, conventional crystalline panels output more power than a thin-film panel of the same size.

Solar Panel Types by Cost

Monocrystalline panels (or modules as they are technically known) carry a hefty price tag, due to its energy-intensive and inefficient manufacturing process with only a 50% yield for every silicon crystal. 

Polycrystalline modules are cheaper because they make use of the crystal fragments leftover from monocrystalline production, which results in a simpler manufacturing process and lower production costs.

Among thin-film solar panels, CIGS is the most expensive, followed by CdTe and amorphous silicon. Apart from the lower acquisition cost, thin-film modules can be easier to install thanks to their lighter weight and flexibility, which lowers the cost of labor.

While the total cost of residential systems has declined by more than 65% over the last decade, the soft cost of a system has

actually risen

from 58% of total system cost in to 65% in .

For more information about soft costs, check out our article on the

soft costs in the solar industry

, and what&#;s being done to reduce them.

Panel (Module) type Average Cost per Watt PERC

$0.32-$0.65

Monocrystalline

$1 &#; $1.50

Polycrystalline

$0.70 &#; $1

Copper indium gallium selenide (CIGS) 

$0.60 &#; $0.70

Cadmium telluride (CdTe)

$0.50 &#; $0.60

Amorphous silicon (a-Si)

$0.43 &#; $0.50

Note that these figures don&#;t include the cost of installation and labor. With labor and other overhead factors, the total can rise to $2.50 to $3.50 per watt.

Other Factors to Consider

Temperature

The temperature of a solar panel can affect its ability to generate energy. This loss of output is reflected through the temperature coefficient, which is a measure of the panel&#;s decrease in power output for every 1°C rise over 25°C (77°F). 

Monocrystalline and polycrystalline panels have a temperature coefficient between -0.3% / °C to -0.5% / °C, while thin-film panels are closer to -0.2% / °C. This means that thin-film panels can be a good option for hotter environments or places that experience more sunlight throughout the year.

Fire rating

The updated International Building Code of requires solar panels to match the fire rating of the roof where they are installed. This is to ensure that the modules do not accelerate the spread of flames in the event of a fire. (California goes one step further by requiring the whole PV system, which includes the racking system, to have the same fire rating).

As such, solar panels now carry the same classification rating as roofs:

Class A

• effective against severe fire test exposure

• flame spread should not exceed 6 feet

• required for wildland-urban interface areas, or areas with high fire severity and wildfire risk

Class B

• effective against moderate fire test exposure

• flame spread should not exceed 8 feet

Class C

• effective against light fire test exposure

• flame spread should not go beyond 13 feet

Hail rating

Solar panels are also

tested for hail impacts

. 

Further reading:
What Are The Benefits Of Installing An Attic Solar Fan

If you want to learn more, please visit our website 72 Cell PV Module.

UL and UL standards address hail storms, by dropping 2-inch solid steel spheres on solar panels from a height of 51 inches, and by firing 1-inch ice balls on PV panels with a pneumatic cannon to simulate hail impacts.

Because of their thicker construction, crystalline panels can withstand hail hitting at speeds of up to 50mph, while thin-film solar panels carry a lower rating due to their thin and flexible nature.

Hurricane rating

While there is no formal solar classification rating for hurricanes, the Department of Energy recently expanded its

recommended design specifications

for solar panels to safeguard against severe weather.

The new recommendations include: 

• Modules with the highest ASTM E-15 rating for snow and wind loading in both the front and back.

• Fasteners with true locking capability based on DIN standard

• The use of through-bolting modules with locking fasteners instead of clamping fasteners

• The use of 3-frame rail systems for improved rigidity and support against twisting

• Tubular frames over open-shaped C channels 

• Perimeter fencing around PV systems to slow down wind forces 

Light-Induced Degradation (LID)

LID is a performance loss commonly seen in crystalline panels during the first few hours of sun exposure. This happens when sunlight reacts with oxygen traces left over from the manufacturing process, which affects the silicon lattice structure.

The LID loss is directly tied to the manufacturing quality and can range from 1-3%.

Summary: Solar Panel Types Compared

PERC Monocrystalline Polycrystalline Thin-film Initial Cost

Highest

High

Middle

Highest to lowest:

CIGS

CdTe

a-Si

Efficiency

Highest (5% more than monocrystalline)

20% and up

15-17%

CIGS: 13-15%

CdTe: 9-11%

a-Si: 6-8%

Appearance

Black with rounded edges

Black with rounded edges

Blue with square edges

Depends on the thin-film variant

Advantages

Requires least space

Most efficient

Highest power capacity

Less expensive alternative to PERC panels without the passivating layer

Middle option in terms of cost, efficiency and power capacity

Lowest cost

Easier to install

Disadvantages

Most expensive initially

Some earlier panels suffered from

light and elevated temperature induced degradation

High initial cost

Low yield in the manufacturing process 

Low heat tolerance, not suitable in hot environments

Shorter lifespan than crystalline panels requires

 more space

Least efficient

So, Which Solar Panel Type Should You Use?

As crystalline and thin-film panels have their own pros and cons, the choice of solar panel ultimately comes down to your specific property and condition settings. 

Limited Space

Those living in a dense area with limited space should opt for highly efficient monocrystalline modules to make the most of the physical space and maximize utility savings. If budget permits, going for PERC panels can lower energy generation costs even more in the long run.

Large Properties

Those with a sufficiently larger property can save on upfront costs by using polycrystalline solar panels, where a bigger panel footprint can offset the lower panel efficiency. However, a larger footprint could also mean added labor costs, so it&#;s not necessarily cheaper to get a higher quantity of less expensive panels. While the initial cost may be low, it may eventually be offset by reduced efficiency and higher operating expenses in the long term.

As for thin-film solar panels, these are best suited for locations where the heavy and labor-intensive installation of crystalline silicon is not feasible. Such locations can include commercial buildings with tight spaces or thin roofs; compact spaces such as recreational vehicles and watercraft; and areas that require flexible installation instead of rigid paneling. 

Keep in mind that solar panels are designed for long-term installation, which can be as long as 25 years. So whatever type you choose to go with, make sure to do your homework to ensure that it&#;s the best option for your needs.

To learn more about

Want to learn more about the solar industry?You&#;ll hear from industry experts on everything from what to expect for the rest of , to how AI is affecting the industry, and more.Solar panels are used to collect solar energy from the sun and convert it into electricity.To get a better feel for the benefits of PERC panels, check out our blog 5 Important Benefits of PERC Solar Panels You Need to Know Unlike crystalline panels that use silicon, thin-film solar panels are made from different materials. These are:To learn more about solar fundamentals subscribe to our blog

Switching to solar energy is an exciting step toward reducing your carbon footprint and lowering energy bills. But with so many options on the market, choosing the right solar panel size can feel overwhelming. It&#;s not just about picking any panel and hoping it fits; size directly impacts efficiency, performance, and your energy needs. Hence, finding the perfect solar panel size makes all the difference. In this guide, we will break down everything you need to know about solar panel sizes, their uses, and how to select the ideal size for your setup.

Common Solar Panel Sizes and Their Uses

What size are solar panels? Well, the most common panels are classified by the number of solar cells they contain, typically ranging from 60 to 96 cells. Each size offers varying levels of power output, making them suitable for different purposes. Let's explore the three most common types: 60-cell, 72-cell, and 96-cell solar panels.

60-Cell Solar Panel Size

60-cell solar panels are among the most common options for residential use. These panels typically measure around 66 inches by 39 inches.

Their smaller size and manageable weight allow for more flexibility during installation, meaning they can fit into tighter areas without compromising efficiency. These panels are ideal for moderate energy needs, especially for small homes or individuals just starting their solar journey.

72-Cell Solar Panel Size

The 72-cell solar panel is a larger and more powerful version of the 60-cell model. These panels typically are 77 x 39 inches in size.

Due to their size, 72-cell panels are heavier and may require a bit more effort to install. However, their higher energy output can power bigger homes or even small businesses. If you&#;re looking to maximize energy efficiency and have the roof space for it, this could be the right size for you.

96-Cell Solar Panel Size

• cell solar panels are designed for high-efficiency applications, such as large commercial installations or homes with high energy demands. Despite their compact size of approximately 41.5 by 63 inches, these panels deliver impressive power output, making them ideal for areas where space is limited but efficiency is crucial. If you need maximum energy generation in a confined space, 96-cell panels are an excellent choice for large-scale installations.

How Solar Panel Size Impacts Your Energy Efficiency

The solar photovoltaic panel sizes directly affect how much electricity it can generate. Larger panels with more cells (like 72-cell or 96-cell models) produce more power, but that doesn&#;t automatically make them the best choice. Energy efficiency is about balance&#;finding the right size for your specific energy needs, roof space, and budget.

For instance, if your household consumes a moderate amount of energy, a 60-cell panel might be more than enough to meet your needs. But if you&#;re running multiple appliances, charging an electric car, or powering a business, you&#;ll want to consider larger panels like the 72-cell or 96-cell options. Additionally, the size of your solar panel can also influence installation costs and labor, as larger panels may require more time and effort to set up.

Solar panel efficiency is also impacted by the amount of sunlight your location receives. If you live in a sunny area, you might need fewer panels than someone in a cloudier region, even if both use the same standard solar PV panel size. Ultimately, your goal is to strike the perfect balance between energy production and physical space.

Bonus: Increase Your Energy Efficiency When You Are Outdoors

While static solar panels are great for homes and businesses, portable solar panels are perfect for outdoor adventures like camping, hiking, or RVing. They&#;re lightweight, easy to set up, and provide reliable power for your devices wherever you are.

The Anker SOLIX PS400 Portable Solar Panel is an excellent option for those needing substantial power on the go. With a capacity of 400W, this panel is perfect for extended outdoor activities, whether it be camping in the mountains or enjoying a weekend at the beach. The PS400 folds down into a compact, durable design, making it easy to carry and set up anywhere. It&#;s ideal for charging your power stations, keeping your devices running smoothly, and ensuring you are never left without energy when you need it the most.

For lighter energy needs, the Anker SOLIX PS30 Portable Solar Panel is an excellent solution. With a 30W output, it is perfect for charging small electronics like smartphones, tablets, or GPS devices during your outdoor adventures. Compact and lightweight, the PS30 is easy to pack and carry, making it ideal for hikers and campers who need a portable yet reliable power source. It&#;s designed to work efficiently even in less-than-perfect weather, so you can stay connected no matter where your journey takes you.

How to Choose the Right Solar Panel Size for You?

Now that you have answer to &#;what size solar panel do i need,&#; how do you choose the right one for your specific situation? The answer depends on several factors, including your energy needs, available space, and installation type.

• Assess Your Energy Needs: The first step in choosing the right solar panel size is to determine how much energy you need to generate. This will depend on whether you&#;re powering an entire home, a business, or just looking for portable energy for outdoor use. Take a look at your current electricity usage on your energy bill to get a sense of your daily and monthly consumption. This will give you a good starting point when calculating how many watts your solar system needs to generate.
• Evaluate Your Available Space: The amount of space you have for installation will also impact your choice. If you're installing panels on a residential roof, measure the surface area to see how many panels will fit. For homes with smaller roofs, 60-cell panels may be the best option as they offer a balance between size and power output. If you have a larger roof or yard, 72-cell or 96-cell panels can provide more power in a fewer number of panels, maximizing your efficiency.
• Factor in Your Budget: Finally, consider your budget. Larger panels with higher energy output tend to have a higher upfront cost, but they may save you more money in the long run through greater energy savings. Portable panels are typically more affordable and are a great solution for those who need temporary or backup power.

Remember to think about long-term savings versus initial costs. While smaller panels may seem cheaper, needing more of them to meet your energy needs can drive up the overall price.

Conclusion

Choosing the right solar panel size is not just about going for the biggest or most powerful option. It is about matching the size of the panel to your energy needs, available space, and overall goals. Remember that there&#;s a perfect solar panel size out there for you. By considering the number of cells, power output, and your specific situation, you will be able to make an informed decision that saves you money and reduces your carbon footprint.

FAQs

How big is one solar panel?

A typical residential solar panel measures about 65 by 39 inches (5.4 by 3.25 feet), although sizes can vary slightly by manufacturer. These dimensions ensure panels can efficiently capture sunlight while fitting within standard roof or installation spaces.

How big is a 400W solar panel?

A typical 400-watt solar panel measures around 79 x 39 x 1.4 inches. Its compact size relative to its power output makes it a great choice for installations where space is limited. These panels usually weigh between 48 and 50 lbs, balancing efficiency with manageability for various solar setups.

Does a larger solar panel produce more power?

Generally, larger solar panels can produce more power because they have more surface area to capture sunlight. However, the actual power output also depends on the panel's cell technology and efficiency. So, while a bigger panel often generates more electricity, it&#;s essential to consider both the size and the quality of the solar cells used.

How much roof space do I need for solar panels?

The roof space required for solar panels depends on your energy needs and the efficiency of the panels. For smaller homes, 200 square feet might suffice, while larger homes may need over 1,000 square feet. Consulting a solar installer can provide a precise assessment based on your specific requirements.

Are you interested in learning more about 72 Cell Photovoltaic Panel? Contact us today to secure an expert consultation!