What is the value of a Schottky diode?

Semiconductor diode

Check now

Not to be confused with Shockley diode

The Schottky diode (named after the German physicist Walter H. Schottky), also known as Schottky barrier diode or hot-carrier diode, is a semiconductor diode formed by the junction of a semiconductor with a metal. It has a low forward voltage drop and a very fast switching action. The cat's-whisker detectors used in the early days of wireless and metal rectifiers used in early power applications can be considered primitive Schottky diodes.

When sufficient forward voltage is applied, a current flows in the forward direction. A silicon p&#;n diode has a typical forward voltage of 600&#;700 mV, while the Schottky's forward voltage is 150&#;450 mV. This lower forward voltage requirement allows higher switching speeds and better system efficiency.

Construction

[

edit

]

1N Schottky diode with cut-open packaging. The semiconductor in the center makes a Schottky barrier against one metal electrode (providing rectifying action) and an ohmic contact with the other electrode. HP - Schottky Barrier Diodes for General Purpose Applications

A metal&#;semiconductor junction is formed between a metal and a semiconductor, creating a Schottky barrier (instead of a semiconductor&#;semiconductor junction as in conventional diodes). Typical metals used are molybdenum, platinum, chromium or tungsten, and certain silicides (e.g., palladium silicide and platinum silicide), whereas the semiconductor would typically be n-type silicon.[1] The metal side acts as the anode, and n-type semiconductor acts as the cathode of the diode; meaning conventional current can flow from the metal side to the semiconductor side, but not in the opposite direction. This Schottky barrier results in both very fast switching and low forward voltage drop.

The choice of the combination of the metal and semiconductor determines the forward voltage of the diode. Both n- and p-type semiconductors can develop Schottky barriers. However, the p-type typically has a much lower forward voltage. As the reverse leakage current increases dramatically with lowering the forward voltage, it cannot be too low, so the usually employed range is about 0.15&#;0.45 V, and p-type semiconductors are employed only rarely. Titanium silicide and other refractory silicides, which are able to withstand the temperatures needed for source/drain annealing in CMOS processes, usually have too low a forward voltage to be useful, so processes using these silicides therefore usually do not offer Schottky diodes.[clarification needed]

With increased doping of the semiconductor, the width of the depletion region drops. Below a certain width, the charge carriers can tunnel through the depletion region. At very high doping levels, the junction does not behave as a rectifier any more and becomes an ohmic contact. This can be used for the simultaneous formation of ohmic contacts and diodes, as a diode will form between the silicide and lightly doped n-type region, and an ohmic contact will form between the silicide and the heavily doped n- or p-type region. Lightly doped p-type regions pose a problem, as the resulting contact has too high a resistance for a good ohmic contact, but too low a forward voltage and too high a reverse leakage to make a good diode.

As the edges of the Schottky contact are fairly sharp, a high electric field gradient occurs around them, which limits how large the reverse breakdown voltage threshold can be. Various strategies are used, from guard rings to overlaps of metallization to spread out the field gradient. The guard rings consume valuable die area and are used primarily for larger higher-voltage diodes, while overlapping metallization is employed primarily with smaller low-voltage diodes.

Schottky diodes are often used as antisaturation clamps in Schottky transistors. Schottky diodes made from palladium silicide (PdSi)[clarification needed] are excellent due to their lower forward voltage (which has to be lower than the forward voltage of the base-collector junction). The Schottky temperature coefficient is lower than the coefficient of the B&#;C junction, which limits the use of PdSi at higher temperatures.

For power Schottky diodes, the parasitic resistances of the buried n+ layer and the epitaxial n-type layer become important. The resistance of the epitaxial layer is more important than it is for a transistor, as the current must cross its entire thickness. However, it serves as a distributed ballasting resistor over the entire area of the junction and, under usual conditions, prevents localized thermal runaway.

In comparison with the power p&#;n diodes, the Schottky diodes are less rugged. The junction is in direct contact with the thermally sensitive metallization; a Schottky diode can therefore dissipate less power than an equivalent-size p&#;n counterpart with a deep-buried junction before failing (especially during reverse breakdown). The relative advantage of the lower forward voltage of Schottky diodes is diminished at higher forward currents, where the voltage drop is dominated by the series resistance.[2]

Reverse recovery time

[

edit

]

The most important difference between the p&#;n diode and the Schottky diode is the reverse recovery time (trr) when the diode switches from the conducting to the non-conducting state. In a p&#;n diode, the reverse recovery time can be in the order of several microseconds to less than 100 ns for fast diodes, and it is mainly limited by the diffusion capacitance caused by minority carriers accumulated in the diffusion region during the conducting state.[3] Schottky diodes are significantly faster since they are unipolar devices and their speed is only limited by the junction capacitance. The switching time is ~100 ps for the small-signal diodes, and up to tens of nanoseconds for special high-capacity power diodes. With p&#;n-junction switching, there is also a reverse recovery current, which in high-power semiconductors brings increased EMI noise. With Schottky diodes, switching is essentially "instantaneous" with only a slight capacitive loading, which is much less of a concern.

This "instantaneous" switching is not always the case. In higher voltage Schottky devices, in particular, the guard ring structure needed to control breakdown field geometry creates a parasitic p&#;n diode with the usual recovery time attributes. As long as this guard ring diode is not forward biased, it adds only capacitance. If the Schottky junction is driven hard enough however, the forward voltage eventually will bias both diodes forward and actual trr will be greatly impacted.

It is often said that the Schottky diode is a "majority carrier" semiconductor device. This means that if the semiconductor body is a doped n-type, only the n-type carriers (mobile electrons) play a significant role in the normal operation of the device. The majority carriers are quickly injected into the conduction band of the metal contact on the other side of the diode to become free moving electrons. Therefore, no slow random recombination of n and p-type carriers is involved, so that this diode can cease conduction faster than an ordinary p&#;n rectifier diode. This property, in turn, allows a smaller device area, which also makes for a faster transition. This is another reason why Schottky diodes are useful in switch-mode power converters: the high speed of the diode means that the circuit can operate at frequencies in the range 200 kHz to 2 MHz, allowing the use of small inductors and capacitors with greater efficiency than would be possible with other diode types. Small-area Schottky diodes are the heart of RF detectors and mixers, which often operate at frequencies up to 50 GHz.

Limitations

[

edit

]

The most evident limitations of Schottky diodes are their relatively low reverse voltage ratings, and their relatively high reverse leakage current. For silicon-metal Schottky diodes, the reverse voltage is typically 50 V or less. Some higher-voltage designs are available (200 V is considered a high reverse voltage). Reverse leakage current, since it increases with temperature, leads to a thermal instability issue. This often limits the useful reverse voltage to well below the actual rating.

While higher reverse voltages are achievable, they would present a higher forward voltage, comparable to other types of standard diodes. Such Schottky diodes would have no advantage [4] unless great switching speed is required.

Silicon carbide Schottky diode

[

edit

]

Schottky diodes constructed from silicon carbide have a much lower reverse leakage current than silicon Schottky diodes, as well as higher forward voltage (about 1.4&#;1.8 V at 25 °C) and reverse voltage. As of they were available from manufacturers in variants up to V of reverse voltage.[5]

Silicon carbide has a high thermal conductivity, and temperature has little influence on its switching and thermal characteristics. With special packaging, silicon carbide Schottky diodes can operate at junction temperatures of over 500 K (about 200 °C), which allows passive radiative cooling in aerospace applications.[5]

Applications

[

edit

]

Voltage clamping

[

edit

]

While standard silicon diodes have a forward voltage drop of about 0.7 V and germanium diodes 0.3 V, Schottky diodes' voltage drop at forward biases of around 1 mA is in the range of 0.15 V to 0.46 V (see the 1N[6] and 1N[7]), which makes them useful in voltage clamping applications and prevention of transistor saturation. This is due to the higher current density in the Schottky diode.

Reverse current and discharge protection

[

edit

]

The Schottky diode's low forward voltage drop is good for energy-efficient applications, because little energy is wasted to heat. This makes them useful as blocking diodes in stand-alone ("off-grid") photovoltaic (PV) systems which prevent batteries from discharging through the solar panels at night. They are also used in grid-connected systems with multiple strings connected in parallel, in order to prevent reverse current flowing from adjacent strings through shaded strings if the bypass diodes have failed.

Switched-mode power supplies

[

edit

]

Schottky diodes are also used as rectifiers in switched-mode power supplies. The low forward voltage and fast recovery time leads to increased efficiency.

They can also be used in power supply "OR"ing circuits in products that have both an internal battery and a mains adapter input, or similar. However, the high reverse leakage current presents a problem in this case, as any high-impedance voltage sensing circuit (e.g., monitoring the battery voltage or detecting whether a mains adapter is present) will see the voltage from the other power source through the diode leakage.

Sample-and-hold circuits

[

edit

]

Schottky diodes can be used in diode-bridge based sample and hold circuits. When compared to regular p&#;n junction based diode bridges, Schottky diodes can offer advantages. A forward-biased Schottky diode does not have any minority carrier charge storage. This allows them to switch more quickly than regular diodes, resulting in lower transition time from the sample to the hold step. The absence of minority carrier charge storage also results in a lower hold step or sampling error, resulting in a more accurate sample at the output.[8]

Charge control

[

edit

]

Due to its efficient electric field control, Schottky diodes can be used to accurately load or unload single electrons in semiconductor nanostructures such as quantum wells or quantum dots.[9]

Designation

[

edit

]

SS14 Schottky diode in a
DO-214AC (SMA) package
(surface mount version of 1N)[10]

Commonly encountered Schottky diodes include the 1N58xx series rectifiers, such as the 1N581x (1 A) and 1N582x (3 A) through-hole parts,[6][11] and the SS1x (1 A) and SS3x (3 A) surface-mount parts.[10][12] Schottky rectifiers are available in numerous surface-mount package styles.[13][14]

Small-signal Schottky diodes such as the 1N,[7] 1N,[15] 1SS106,[16] 1SS108,[17] and the BAT41&#;43, 45&#;49 series[18] are widely used in high-frequency applications as detectors, mixers and nonlinear elements, and have superseded germanium diodes.[19] They are also suitable for electrostatic discharge (ESD) protection of sensitive devices such as III-V-semiconductor devices, laser diodes and, to a lesser extent, exposed lines of CMOS circuitry.

Schottky metal&#;semiconductor junctions are featured in the successors to the TTL family of logic devices, the 74S, 74LS and 74ALS series, where they are employed as Baker clamps in parallel with the collector-base junctions of the bipolar transistors to prevent their saturation, thereby greatly reducing their turn-off delays.

Further reading:
What is infrared touch monitor for rail transit and Why Do We Use Them?
10 Questions You Should Know about Diode Ultra Fast Recovery: A Comprehensive Guide

For more information, please visit Hornby Electronic.

Alternatives

[

edit

]

When less power dissipation is desired, a MOSFET and a control circuit can be used instead, in an operation mode known as active rectification.

A super diode, consisting of a pn-diode or Schottky diode and an operational amplifier, provides an almost perfect diode characteristic due to the effect of negative feedback, although its use is restricted to frequencies the operational amplifier used can handle.

Electrowetting

[

edit

]

Electrowetting can be observed when a Schottky diode is formed using a droplet of liquid metal, e.g. mercury, in contact with a semiconductor, e.g. silicon. Depending on the doping type and density in the semiconductor, the droplet spreading depends on the magnitude and sign of the voltage applied to the mercury droplet.[20] This effect has been termed &#;Schottky electrowetting&#;.[21]

See also

[

edit

]

• Heterostructure barrier varactor &#; Semiconductor device with variable capacitance
• List of 1N58xx Schottky diodes
• Schottky effect &#; a phenomenon in condensed matter physics

  Pages displaying wikidata descriptions as a fallback

References

[

edit

]

A diode is a two-terminal electronic component that mainly conducts electricity in one direction. As we know, an ideal diode will have zero resistance in one direction, and infinite resistance in the reverse direction. There are many types of diodes, namely light-emitting diodes, Zener diodes, photodiodes, Schottky-diode, avalanche diodes, PN junction diodes, and many more. In this article, let us learn in detail about the Schottky-diode.

What is Schottky Diode?

The schottky diode is a type of metal &#; semiconductor junction diode, which is also known as hot-carrier diode, low voltage diode or schottky barrier diode. The schottky diode is formed by the junction of a semiconductor with a metal. Schottky diode offers fast switching action and has a low forward voltage drop. As we are aware that in a PN junction diode, p-type and n-type are joined together to form a PN junction. Whereas, in a Schottky diode metals like platinum or aluminum are used instead of P type semiconductors. 

SymbolV-I CharacteristicsWorkingApplicationsAdvantagesDisadvantagesDifference

What is Schottky Diode Symbol?

The symbol for the Schottky barrier diode is based around the basic diode circuit symbol. The circuit symbol of the Schottky diode is shown in the figure.

 

V-I Characteristics of Schottky Diode

The V-I characteristics of Schottky diodes are very much similar to the PN junction diode. Current is the dependent variable while voltage is the independent variable in the Schottky diode. The forward voltage drop of the Schottky diode is low between 0.2 to 0.3 volts.

You may also want to check out these topics given below!

Working of a Schottky Diode

• The operation relies on the principle that the electrons in different materials have different potential energy.
• N-type semiconductors have higher potential energy than electrons of metals.

• When these two are brought into contact, there is a flow of electrons in both directions across the metal-semiconductor interface.
• A voltage is applied to the Schottky so that the metal is positive when compared to the semiconductor.
• The voltage opposes the built-in potential and makes the current flow easy.

Applications of Schottky Diode

Schottky diodes have been useful for the industry of electronics that has spotted many applications in diode rectifiers because of its unique properties. Here are some major areas where it is widely used.

RF mixer and detector diode:

The Schottky diode consists of its radio frequency functions owing to its switching speed at the highest level and top frequency capability. The Schottky barrier diodes come handy for diode ring mixers with high performance.

Power rectifier:

The Schottky barrier diodes also have functions with high power as rectifiers. The high density of current and voltage drop with low forward shows that the wastage of power is lesser than the normal PN junction diodes.

Power OR circuits:

This diode would be useful for functions where two different power supplies drive a load like in battery supply. It is important that the power coming from supply should not mix with the others.

Solar Cell Applications:

As we know,  the solar cells are usually linked to the batteries that are rechargeable, mostly batteries with lead-acid since power supply must be necessary round the clock. Solar cells would not support the applied charge in reverse and thus, a diode would be used in a proportional pattern of the solar cells.

Advantages of Schottky diode

Following are the advantages of Schottky diode:

• The capacitance of the diode is low as the depletion region of the diode is negligible.
• The reverse recovery time of the diode is very fast, that is the change from ON to OFF state is fast.
• The current density of the diode is high as the depletion region is negligible.
• The turn-on voltage of the diode is 0.2 to 0.3 volts, which is very low.

Disadvantages of Schottky diode

The only disadvantage of Schottky diodes is that the reverse saturation current of the diode is large.

What is the difference between Schottky diode and PN junction diode?

Schottky diode PN junction diode In this diode, the junction is formed between the n-type semiconductor and the metal plate In this diode, the junction is formed between the p-type and n-type semiconductors The forward voltage drop is low The forward voltage drop for pn junction diode is more Reverse recovery loss and reverse recovery time are very less Reverse recovery loss and reverse recovery time are  more It is a unipolar device It is a bipolar device The conduction of current happens only due to the movement of electrons The conduction of current happens due to the movement of electrons and holes

Frequently Asked Questions &#; FAQs

Q1

Why is there no reverse recovery time in the diode?

There are no stored charges as the metal-semiconductor junction is used, due to which the switching is faster.

Q2

What are the majority charge carriers in a barrier diode?

Electrons

Q3

Why can Schottky diodes be switched off much faster than the p-n junction diode?

As there is no recombination of charges, there is no reverse recovery time which makes switching off faster.

Q4

What is reverse recovery time?

Reverse recovery time of the diode is defined as the time taken by the diode to regain its blocking capability.

Q5

What is a blocking diode?

A blocking diode is a diode used to direct the energy flow in one direction in a wire.

The company is the world’s best China Schottky diode bridge rectifier Factory supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

Why shouldn&#;t you touch electrical equipment with wet hands? Find out answer to this question by watching the video.