What is the best light source for a projector?

At the heart of every projector are two essentials: the imaging technology and the light source. The two interact in such a way that to fully understand your choices for the light source, you also have to know a little about the imaging technology it's paired with, and how imaging technologies work in general. So before we look at today's most common projection light sources&#;lamp, laser, and LED&#;and which might be best for your needs, let's start by talking about imaging.

bitaso contains other products and information you need, so please check it out.

All color displays, including projectors, are built around a core observation of how the human visual system perceives color. Namely, if you're working with light, you need only three primary colors&#;red, green, and blue&#;to produce every color the human eye can see. You only have to mix these three primary colors in the right proportions. Or at least that's the essence of it.

The concept of additive color allows that the three primary colors of red, green, and blue (for which the human eye has receptors) can be mixed to create all other visible colors, including white and the secondary colors magenta, cyan, and yellow.

To be precise, the gamut of colors you can produce depends on the choice of red, green, and blue you start with, and if the starting points won't let you create every possible color, you can expand the gamut by adding more colors, like yellow, cyan, and magenta. We'll stay with the simplified version using just red, green, and blue for now, because that's what most displays do. But keep in mind that some add other colors, which we'll get to a little later.

Creating Color

If you launch a Windows or Mac program with a white background and use an 8x jeweler's loupe to look at your desktop or laptop screen up close, you won't see white. You'll see a repeating series of red, green, and blue rectangles&#;call them dots. Each set of red, green, and blue dots is a single pixel in the image. When you're too far away from the screen for your eye to resolve the individual dots, it integrates the three colors into the color you see, in this case white. Change the intensity of one or more of the primary colors and you'll see the combination as some other color. Turn off the blue dot, for example, and your eye will see the red and green combination as yellow. You might think of this as tricking your eye into seeing a color that isn't there. However, this is just a variation on how we see different colors in real world objects.

Digital video displays, such as this LCD screen, have pixels comprised of separately addressable red, green, and blue subpixels that allow mixing of the primaries to create any color, including white. Your eye blends them together when viewed from a distance. Black is the absence of light created by turning pixels off.

This approach&#;of putting small dots of three primary colors on the screen at once and letting your eye integrate the colors over space&#;is also how projectors with three imaging chips work, a group that includes most models that use LCD or LCoS imaging chips, and a few seriously expensive models that use DLP chips. (At this writing, the least expensive, currently produced three-chip model in our database is $27,526.) There are also palmtop and pocket laser projectors that produce colors this way, aiming red, green, and blue laser beams directly at the screen to paint the image dot by dot, one dot at a time.

Time vs. Space

Another way to create color from three primaries is to show the red, green, and blue elements of the entire image separately, in sequence. If you rotate through the sequence repeatedly and quickly enough, your eye will integrate the colors over time. This is how single-chip projectors work, including the overwhelming majority of DLP models.

The potential problem with sequential color is that if the projector rotates through the color sequence too slowly in, say, a scene where James Bond walks across the room quickly while wearing a tuxedo and white shirt, the red, green, and blue elements of the shirt can fall on different parts of the retina. What you see then instead of white is a burst of red, green, and blue, otherwise known as a rainbow artifact. Some people see these more easily than others, and some projectors tend to show them more easily. Which brings us to light sources.

The rule of thumb for rainbow artifacts in single-chip projectors is that a larger percentage of laser projectors do a better job of avoiding them than projectors with LEDs, and a larger percentage with LEDs do a better job of avoiding them than projectors with lamps. This doesn't mean that all laser projectors necessarily show fewer rainbow artifacts than all lamp projectors, but it does mean that if you see these artifacts easily and consider them bothersome, it will be easier to find a single-chip laser projector you're comfortable watching than a single-chip lamp-based projector. That said, most major manufacturers of single-chip projectors have made gains in recent years in minimizing the potential for rainbows, though our usual caveat always applies: if you're sensitive to seeing these or worry you might be, it's best to purchase from a retailer who accepts returns or exchanges.

Putting aside the rainbow factor, there are also some advantages for projectors built around a single chip and sequential color. They're almost always smaller and lighter than equivalent projectors that use three chips, for example. That's one reason why most palmtop and pocket-size projectors use a single imaging chip even for LCD and LCoS models.

White Brightness and Color Brightness

Single chip projectors also tend to be less expensive than equivalent three-chip projectors with the same rated brightness. But the issue of brightness is less straightforward than you might assume, because of the difference between white brightness and color brightness.

Briefly, white brightness&#;which is what projector lumen ratings refer to unless otherwise specified&#;measures brightness using a 100% white image. Color brightness measures the brightness for 100% red, 100% green, and 100% blue images separately, then adds the three measurements together.

Since three-chip projectors produce white by a combination of red, green, and blue dots, the maximum brightness for white is the same as the total of the maximum for red, green, and blue measured separately. This isn't always true for single-chip projectors, which sometimes add white or other colors to boost white brightness&#;a subject we'll come back to in a moment. The point here is that a less expensive single-chip projector that offers the same white brightness as a more expensive three-chip projector may have a lower color brightness.

This difference can give a single-chip design the advantage for business or education use, since it can match the brightness of a more expensive three-chip projector for images with a white background&#;like spreadsheets and word processing documents. But if the single-chip projector also has a lower color brightness&#;and we've measured color brightness as low as 20% of white brightness in some cases&#;it won't match the three-chip projector in brightness for full color images like photographs and movies. (You can read more about the difference between white brightness and color brightness in this article.)

Competitive projector manufacturers and projection enthusiasts are always debating the merits of color vs. white brightness and how the three-chip and single-chip approaches call for trade-offs in color accuracy or contrast. The image of colored paper on the left, projected from a calibrated 3-chip LCD projector with equal color and white brightness, appears brighter overall than the same image on the right from a calibrated single-chip DLP projector. However, if you focus on the white strip on the bottom half of the image just left of center, you can see that the single-chip has a more neutral white and higher apparent contrast. You can dive more into this subject in our article ANSI Lumens vs Color Light Output: the Debate Between LCD and DLP.

All of which brings us back to how projectors create the colors you see on screen along with a quick look at light paths&#;a light path being the route light follows from source to lens in any given projector.

Light Paths

Light paths describe how a projector creates the red, green, blue (and potentially other colors) it needs; how it shines them through or bounces them off its imaging chips; and how it directs the light at the screen.

There are lots of variations in each step. For example, lamp-based projectors start with the white lamp light, and use filters to separate out the red, green, and blue components. Some LED projectors use red, green, and blue LEDs. Others start with blue and yellow LEDs, and use filters to separate out the red and green. Most laser projectors start with blue laser light, add yellow by aiming the laser at a phosphor that emits yellow when excited, and then use filters to break up the yellow into red and green components.

Lamp-based single-chip projectors typically pass their white light source through filters (most often presented as segments in a translucent color wheel) before bouncing the individual colors off the imaging chip sequentially. (Image courtesy of Maxell.) Though laser projector projectors can vary greatly in their light path depending on whether a single or multiple lasers are utilized, a typical single-laser projector has a blue laser whose light encounters a phosphor wheel to generate yellow that is then broken into red and green components. (Image courtesy of Maxell.)

Most of the variations in light paths won't affect your choice of light source. However, one key variation based on the number of imaging chips can.

For projectors with three chips, once you have red, green, and blue, the path is simple: you aim the right color beam at the right chip, and direct all three colors through the lens simultaneously. For single-chip projectors, the path is trickier, since the projector has to send each color to the chip at the right time, namely: when it's ready to project dots in that color.

Depending on the type of light source, three-chip projectors use different methods to create separate red, green, and blue light streams that get sent to dedicated imaging chips for each primary color. (Image courtesy Maxell.)

Single-chip LED projectors with red, green, and blue LEDs can simply turn each color LED on and off in sequence. Lamp-based models use a rotating color wheel that holds the color filters and is timed so each color filter is in the path of the light just when the chip needs that color. Most single-chip laser projectors do something similar, using a clear panel on both the phosphor wheel and color wheel to let blue laser light reach the chip and filters on the color wheel to convert the yellow light from the phosphor into red and green.

The color wheels that single chip projectors use makes it easy to add more colors besides red, green, and blue. The most common for lamp based projectors is a clear panel to add white&#;which is what lets them deliver higher white brightness than color brightness. Others add some combination of yellow, cyan, and magenta. For laser projectors, the most common addition is the yellow produced by the phosphor, simply by adding a clear panel to the color wheel.

The additional colors (and yes, white is a color in this context) can affect the colors you see. Adding white will make the image brighter, but it will also tend to hurt color accuracy, with color errors becoming more and more likely to be noticeable with bigger differences between white and color brightness. On the other hand, adding a yellow panel to a single-chip projector increases the odds that it can show a bright, vibrant yellow that matches the yellows in the best three-chip projectors. And adding yellow, cyan, and magenta panels increases the odds of delivering good color accuracy overall.

Color wheels come in many variations, some with only the red, green and blue primaries, and some adding various secondary colors to improve color accuracy or white to boost brightness.

So a lamp-based, single-chip projector with a white panel added to its color wheel is usually desirable if you need a projector to watch in a conference room, classroom, or family room with ambient light. But it's usually a poor choice for a traditional home theater meant for viewing in a dark room. For home theater, color accuracy matters more, and the accuracy will almost certainly be better with just red, green, and blue panels in the wheel. Add some combination of yellow, cyan, and magenta and it may be better still.

And with all this as background, let's finally take a look at the light sources themselves.

Lamps vs. Not Lamps

There are only a few key specs that define the practical difference between lamps and solid-state light sources, meaning both LEDs and lasers: the range of brightness, the typical rated lifetime, and the percentage of initial brightness each loses early on. Lamps are outclassed by both solid-state technologies on two of these factors, and by lasers on all three. In addition, lamps have the shortcoming of containing mercury, which means you have to be concerned about disposing of them properly. All of which suggests lamps may be approaching the dead-man-walking phase of their evolution. But they're not there yet.

The brightness range for current lamp-based projectors in our ProjectorCentral Find a Projector database is roughly 1,000 to 43,000 lumens, although you can still find some rated at a few hundred lumens. The top brightness is a lot higher than for LED projectors, which range from 10 lumens to 4,500 lumens, but lower than for laser projectors, at 32 lumens to 75,000 lumens.

Lamp life varies with the projector model. For current projectors, it ranges from 2,000 to 10,000 hours in full power mode, and from 2,500 to 20,000 hours in Eco mode. But Eco mode ratings of 15,000 hours or more generally get their long life from features like slowly lowering power use&#;and brightness&#;when you leave the projector on for a while without the image changing. This can be useful in, say, a classroom where you might leave the projector running for some time even when you're not using it. But if you rarely or never do that, the lamp won't last that long.

Projection lamps, like the one shown here, will typically need periodic replacement over the projector's service life to restore the projector to its initial brightness. How many replacements depends on the hours of use and how bright the projector is set up to run. (Image courtesy of Epson.)

In contrast, the vast majority of lasers and LEDs are rated at 20,000 hours or more at full power, and typically 30,000 hours in Eco mode. Some claim even longer lives. Note that end of life for LEDs and lasers isn't defined the same way as end of life for lamps, but both ratings are rough predictions of the light source's useful life.

Lamps also lose brightness more quickly than solid-state light sources, often by as much as 25% in the first 500 hours of use, then dropping more gradually to the 50% that defines end of life after that. Solid state projectors take longer to drop to any given percentage of initial brightness only partly thanks to their longer lives. They also have somewhat closer to a straight line of steady loss of brightness over their entire lives, rather than dropping halfway to end of life levels early on.

Initial Cost and Total Cost

One clear strong point for lamps is low cost, which lets you buy a lamp-based projector for significantly less than the equivalent solid-state projector. But although a low initial price is obviously attractive, the key phrase is initial price. You should also consider the total cost of ownership.

Basically, the more often you expect to use the projector and the longer you expect to have it before replacing it, the more lamps you'll have to buy. What this translates to is that if you're planning to use a projector strictly for watching one or two movies a week, and you're the sort of videophile who wants to upgrade with every new innovation that comes to market&#;higher resolution, 3D, HDR, better implementation of HDR, and so on&#;the initial price may be your total cost. The same logic applies for a business, church, or school that expects to use the projector only a couple of hours a week.

At the other extreme, if you're buying a projector to use in a classroom or at home as a TV for five or more hours per day, and you don't expect to replace it before it becomes hopelessly obsolete, the cost of replacement lamps may be significant. In that case, you might want to calculate how many lamps you'll likely buy over the projector's lifetime and add the cost to the initial price. You may find that the lamp based projector winds up costing more in the long run. If so, a more expensive, solid-state projector can be the better buy&#;provided, of course, that it delivers the level of image quality you want.

LEDs, Lasers, and Hybrid (Laser-LED) Light Sources

LEDs are the light source for the overwhelming majority of small projectors, from sizes that will fit in a shirt pocket to palmtops and a little larger up to just under 2 pounds. Because the brightness for these projectors can be well below 100 lumens and is no more than 1,500 lumens, they're generally designed to get the most brightness possible from the LEDs, which often results in vibrant, but oversaturated, color. Few people, if any, would consider this a problem for business or classroom use. But if you want to watch movies or show photos, you'll have to make allowances with some of these models for colors that wander outside of a realistic range.

The few small projectors that don't use LEDs draw the image directly with lasers. This gives them an advantage specific to laser light. Just point the projector at any surface at any distance, and the image will be in focus. Unfortunately, another property of laser light is speckling artifacts. The speckles are less obvious in some models than others, but to minimize the speckling they defocus the image a bit. So with these models, you'll have to choose between a projector with the best possible focus or one without speckles.

Somewhat larger and brighter projectors, in the range of about 1,500 to 4,500 lumens, give you a choice in solid-state light sources of LEDs, Lasers, and LED-laser hybrids. All of the current hybrids at this writing are single-chip DLP projectors that are designed to emphasize brightness over good contrast and color accuracy, which means they're most appropriate for business and education. As with lamp-based projectors, any given LED projector can be designed for either kind of application, but even those that are designed for home theater use&#;and there are some that are specifically intended to replace flat-screen TVs&#;tend to have color accuracy that's best described as good enough.

Hybrid laser/LED light engines aren't common today, but Casio's lamp-free models feature a red LED in addition to a blue laser to improve color while retaining the high brightness and other benefits of solid-state laser projection. (Image courtesy of Casio.)

Lasers

Lasers in any brightness range can potentially deliver color accuracy and contrast as good as or better than lamp-based projectors&#;even though many laser projectors at this writing don't do so. And unlike lamp-based and LED models, even laser projectors designed to emphasize brightness over contrast and color accuracy can almost always handle movies well enough to be highly watchable.

Another advantage for laser projectors is that they tend to be far more useable at their highest brightness levels than lamp-based or LED models. All projectors' brightness ratings are based on settings that sacrifice color accuracy. For LED and lamp-based projectors, this typically adds a noticeable green bias. But most laser projectors deliver good enough color accuracy even in the brightest mode that most people would consider the colors more than acceptable for photorealistic images.

There are also some other advantages to laser light sources. Most laser projectors that pair the laser with a DLP chip, and some that use three LCDs, are virtually maintenance free, suitable for 24/7/365 operation, and can be mounted in any orientation over 360 degrees in all three axes. Having a maintenance-free projector is a welcome convenience for anyone. But the combination of features makes laser projectors the obvious preferred choice for certain kinds of applications, including digital signage, museum exhibits, and displays in locations from houses of worship, to retail stores, to corporate front lobbies and elsewhere.

For all these reasons, or until such time as LED catches up on laser's ability to deliver higher brightness, it seems lasers are bound to take over as the dominant&#;and eventually, perhaps, only&#;projector light source. For the moment, however, lasers, LEDs, and lamps each have their place. You just have to choose the right one.

When shopping for a projector, one of the most frequently encountered terms is lumens. But what exactly are lumens, and why are they so important? Officially called ANSI lumens, this measurement indicates the brightness of a light source, which is crucial for determining how well a projector will perform in different environments. 

Keep reading to learn about the concept of projector lumens or explore ViewSonic projectors to find the best one for you. 

When you&#;re evaluating projectors for your home or business, it&#;s easy to become overwhelmed with the terminology associated with the devices.  While projector resolution receives much attention, the lumen value is another crucial factor to consider. 

What are Projector Lumens? 

Lumens, usually indicated as &#;ANSI Lumens&#; (American National Standards Institute lumens) as the industry-standard measurement, determine the brightness level of a projector&#;s light source.  

Projectors use three types of light sources: lamp, LED, and laser. Lamp projectors usually offer higher initial brightness, typically starting at 2,000 ANSI Lumens, but require periodic lamp replacements and experience brightness degradation over time. In contrast, lamp-free projectors, such as LED and laser models, provide consistent brightness throughout their longer lifespan, with laser projectors exceeding 3,500 ANSI Lumens and LEDs offering superior color saturation and efficiency despite lower lumen counts. 

To give you a better idea, here are the lumen counts of common light sources: 

• Candle: 14 lumens

   

• 100-watt light bulb: lumens

   

• Sunset: 400 lumens

   

• Fluorescent lighting in office: 400 lumens

   

• Lighting on a movie set: lumens

   

• Sunny day: up to 100,000 lumens

   

Why Do Projector Lumens Matter?

 

Are you interested in learning more about LED Projector Light Supplier? Contact us today to secure an expert consultation!

Lumens measurement is crucial for devices like projectors, where brightness directly affects image quality and visibility in various environments. The higher the lumens count, usually the brighter the light is. 

The concept of lumens is tailored to match how the human eye perceives light, making it a practical standard for comparing different light sources. However, when evaluating the brightness of modern wide color gamut projectors with LED and RGB laser light sources, it&#;s important to note that ANSI brightness ratings alone may not accurately reflect their true performance. This is due to the Helmholtz-Kohlrausch (HK) effect, where highly saturated images appear brighter than less saturated ones. 

What Brightness Level Best Suits Your Needs?

 

Selecting a projector isn&#;t as simple as choosing the highest lumen count. There&#;s no one-size-fits-all solution, as several factors influence the required brightness level for a quality picture. 

Factors Affecting Projector Brightness

 

Ambient Light

 

Consider the amount of natural or artificial light in the room where you&#;ll be projecting content. For example, natural light from windows can reduce the visibility of the projected image. In brighter environments, you&#;ll need a projector with higher lumens to prevent the image from washing out. 

Screen Size

 

The size of the projection screen can influence how bright the image appears. Larger screens typically require projectors with higher lumens to maintain a clear and vibrant image. 

Room Size & Distance from Screen

 

The size of the room plays a significant role in determining the required lumens. Larger rooms need higher lumens to ensure even brightness distribution across a broader viewing area. Additionally, the arrangement of seating and the distance from the screen can influence how well viewers perceive the projected content. Adequate lumens are essential to ensure everyone in the audience has a clear and enjoyable view. 

Projectors for Home 

 

Home entertainment projectors rated under 3,000 ANSI Lumens are typically sufficient for daily use. This brightness level can easily project an 80&#; image with minimal distortion, though controlling ambient light is crucial.For larger images or rooms with more ambient light, higher lumen projectors are necessary. 

Under 3,000 ANSI Lumens: Best for better color performance but requires tight control of ambient light. 

Above 3,000 ANSI Lumens: Less sensitive to ambient light, ideal for larger images. 

Projectors for Business and Education

 

To address the diverse requirements of both business and education, specific lumen thresholds come into play when selecting projectors for business and education settings. 

Different settings require different ANSI lumen thresholds: 

• Smaller Settings (1-10 people)

   

For meeting rooms or classrooms, 3,000-3,999 ANSI lumens are ideal. This setting easily projects an 80&#;+ screen size, at a value price point. It&#;s best only to use projectors with these lumen levels when ambient light is minimal. 

• Medium Settings (10-50 people)  

   

For mid-sized meeting rooms or classrooms, 4,000-4,999 ANSI lumens provide high-quality images of 80&#;+, but the higher brightness means that the user doesn&#;t have to worry as much about ambient light. 

• Large Spaces (more than 50 people)

    

   

For large meeting rooms, exhibition halls, or auditoriums, 5,000+ ANSI lumens are suitable for handling high levels and projecting images 100&#; or larger. The power of these projectors means they work well even with high levels of ambient light. 

Final Thoughts

 

Although projectors are relatively simple to use, choosing the best one to fit your needs is a bit more difficult. When it comes to striking a balance between value and performance, you need to consider how and where your projector will be used. 

If you plan to use the device outdoors or in a room with much ambient light, then a high lumen count is essential. The same applies to situations where you&#;re using a projector in a large space, and/or require a larger screen size. 

However, if you&#;re looking for a budget-conscious solution, choosing a projector with fewer lumens is practical if you use it in a setting where ambient light can be controlled, and space of small to medium size. 

Still need guidance in choosing the right projector? Dive into our article on choosing the ideal office projector or commercial projector for digital signage. 

Or explore the range of ViewSonic projectors to find the one that perfectly matches your needs. 

Was this article helpful?

Yes

No

SHARE

For more information, please visit flood light supplier.