The Benefits of Using hot dipped galvanized water tank

Another benefit of hot dipped galvanized pressed square steel tanks is that they are incredibly versatile. They can be used for a wide range of applications, including water storage, fuel storage, and chemical storage. This makes them ideal for a variety of industries, such as agriculture, industrial manufacturing, and oil and gas. Whether you need a tank for storing potable water or for storing hazardous materials, a hot dipped galvanized pressed steel tank can handle the job. An important aspect of te versatility is that these square tanks can be configured in bespoke to any length, width or height, according to the customer&#;s available space. Making a tailor-made solution possible for any application and industry.

Longzhuo Product Page

Scientific molding technology increased the strength of several times, not only to ensure the maximum pressure needs of the water tank, but also to save materials, to meet the requirements of beautiful water tank, practical. Galzinc water tank sealing good, not easy to breed algae and red insects, to avoid the secondary pollution of water.

&#;. Hot dip galvanized steel water tank (refer to national standard GB02S1

&#;.Compared with the assembled enamel steel tank, the hot dip galvanized water tank has the same structure, material selection and assembly mode, and the difference is not the same in the anticorrosion mode.

&#;.Hot dip galvanized water tank adopts advanced technology, selection of high quality materials, after hot dip galvanized, make the surface of the water tank form a dense galvanized layer, and the interface between the ions of the steel plate permeate each other, mix to form a diffusion layer, increase the adhesion strength of the galvanized surface. The galvanized surface is smooth, easy to clean, and corrosion resistance, steel plate assembly structure, not easy to deformation, strong seismic resistance, impact resistance, through a long time of wide use, shows a good effect and users praise.

&#;. Hot dip galvanized water tank adopts Q235 steel plate, stamping to form * and *500 500*500 standard block, peripheral drilling, galvanized treatment, on-site assembly, assembly between the standard block silica gel sealing, bolt connection.

&#;.Hot dip galvanized water tank the product is suitable for building water storage, regulating water tank, heating system expansion, condensation water tank and construction, geological survey, industrial, national defense engineering and other temporary water storage tank.

&#;. The diameter and position of the inlet pipe, outlet pipe and overflow pipe of the hot dip galvanized water tank are determined by the design; There should be no less than 700mm channel around the tank, and no less than 600mm at the bottom and top of the tank. Installation around the bottom of the box and the bottom of the standard between the connection gap should be located on the support.

&#;. Anti-corrosion: hot dip galvanized water box and accessories are galvanized.

&#;. Hot dip galvanized water tank water test: after the water tank level installation, close the outlet pipe and drain pipe, open the inlet pipe, while discharging water check, filled up, after 2-3 hours no seepage is qualified.

&#;.Hot dip galvanized water tank has the inspection report of the national authoritative inspection department.

• The size of the water tank, the position of the pipe and the diameter of the pipe should be provided when ordering.
• It is appropriate to use the storage water temperature of 4-65&#;. If the temperature of water storage is higher than this value, it can be put forward at the time of ordering and solved separately.
• The load on the ground of the water tank shall be approved by the structural designer.

&#;.Hot dip galvanized water tank water test: after the water tank level installation, close the outlet pipe and drain pipe, open the inlet pipe, while the water check to see the full, after 2-3 hours no seepage is qualified.

&#;. The hot-dip galvanized water tank has the inspection report and health license of the national authoritative testing department.

&#;.Hot dip galvanized water tank selection instructions:

• The size of the water tank, the position of the pipe and the diameter of the pipe should be provided when ordering.
• It is appropriate to use the storage water temperature of 4-65&#;. If the temperature of water storage is higher than this value, it can be put forward at the time of ordering and solved separately.
• The load on the ground of the water tank shall be approved by the structural designer.
• When the user provides the water tank to take over the position just in the plate seam, the company needs to adjust, the pipe diameter remains the same.

XIII.The application of hot dip galvanized water tank

For more information, please visit hot dipped galvanized water tank.

The galvanized water tank is used for the storage of building water supply, regulating water tank, heating system expansion, condensation water tank and construction, geological survey, industrial, national defense engineering and other temporary water storage tank.

Inquiry please contact.

&#;:

&#;:+86

Web:www.chinaestop.cn

&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;

&#; Wish to be your best partner in China! Welcome to visit our company &#;

Follow Us:

Linkedin: https://www.linkedin.com/company/xsy-chinaestop

Facebook: https://www.facebook.com/chinaestop/       

Twitter: https://twitter.com/Chinaestop

Youtube: https://www.youtube.com/channel/UCCBJA5kWafx6dwkKHbMdoAQ/videos

The company is the world’s best grp panel type water tank supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.